1.4 Mounting instructions
1.4.1 Heat dissipation
For correct functioning, the srvo drive must be installed on a sufficiantly dimensioned heat conducting
surface made of a suitable material, such as aluminum.
Ensure that the servo drive is screwed properly to the heat conducting surface to facilitate the heat
transfer.
1.4.2 Dimensions
Hardware Manuals / SOMANET Node / SOMANET Node rev. C.4 /
Installation Guide
© 2021 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.7.3 | Built 2021-03-29
16/17
