14
PLL_set_A
The GDR216 is capable of re-clocking a range of 3Gbit/s, HD and
SD SDI transport stream bitrates.
PLL_Set_A
is used to set input
A of the GDR216 to the correct bitrate of the incoming signal.
PLL_Set_A
can be set to
Auto
,
270 Mb/s
,
1485 Mb/s
and
2970 Mb/s
. The default setting is
Auto
.
Reclocker_A
The setting item
Reclock_A
determines if the incoming signal on
input A will be reclocked by the GDR216. The settings are:
■
Auto
: Auto selection between
Bypass
and
Reclocked
.
■
Bypass
: Does not re-clock the incoming signal
■
On
: The GDR216 always attempts to re-clock the input
The default setting is
Auto
.
Mute_A
Mute_A
enables input A of the GDR216 to be muted. The settings
of
Mute_A
are
On
,
Off
,
Input Loss
or
PLL Unlock
. Set to
Input Loss
will mute input A only in case a carrier loss is
detected on input A. Set to
PLL unlock
will mute input A in case
the PLL rate of input A is not available. The Default setting is
Off
.
PLL_set_B
The GDR216 is capable of re-clocking a range of 3Gbit/s, HD and
SD SDI transport stream bitrates.
PLL_Set_B
is used to set input
B of the GDR216 to the correct bitrate of the incoming signal.
PLL_Set_B
can be set to
Auto
,
270 Mb/s
,
1485 Mb/s
and
2970 Mb/s
. The default setting is
Auto
.
Reclocker_B
The setting item
Reclock_B
determines if the incoming signal on
input B will be reclocked by the GDR216. The settings are:
■
Auto
: Auto selection between
Bypass
and
Reclocked
.
■
Bypass
: Does not re-clock the incoming signal
■
On
: The GDR216 always attempts to re-clock the input
The default setting is
Auto
.
Mute_B
Mute_B
enables input B of the GDR216 to be muted. The settings
of
Mute_B
are
On
,
Off
,
Input Loss
or
PLL Unlock
. Set to
Input Loss
will mute input B only in case a carrier loss is
detected on input B. Set to
PLL unlock
will mute input B in case
the PLL rate of input B is not available. The Default setting is
Off
.