27
#Lt/Rt C dwnmx
Lr/Rt Center Mix Level. This setting indicates the level shift applied to the
center channel when adding to the left and right outputs when downmixing
to an Lt/rt output. Its operation is similar to the surround downmix level in
the Universal metadata. 0dB, -1.5dB, -3.0dB, -4.5dB, -6.0dB and –999dB.
You can also choose to use the metadata settings in the external program
(
Ext_meta
, only usable when the
MD_enc1
till
MD_enc4
are set to
MxA
till
MxH
). Default is –3dB.
#Lt/Rt S dwnmx
LtRt Surround Mix level. This setting indicates the level shift applied to
the surround channels when downmixing to an Lt/Rt output. Its operation
is similar to the surround downmix level in the universal metadata. -
1.5dB, -3.0dB, -4.5dB, -6.0dB and -999dB. You can also choose to use the
metadata settings in the external program (
Ext_meta
, only usable when
the
MD_enc1
till
MD_enc4
are set to
MxA
till
MxH
). Default is –3dB.
#Lo/Ro C dwnmx
Lo/Ro Center mix level. This setting indicates the level shift applied to the
center channel when adding to the left and right outputs when downmixing
to a Lo/Ro output. When Extended BSI parameters are active, this
parameter is used and the Center Mix Level parameter in the universal
parameters is not.+3dB, +1.5dB, 0dB, -1.5dB, -3.0dB, -4.5dB, -6.0dB and
-999dB. You can also choose to use the metadata settings in the external
program (
Ext_meta
, only usable when the
MD_enc1
till
MD_enc4
are
set to
MxA
till
MxH
). Default is –3dB.
This setting will automatically change the
C_downmx
metadata setting
(which can not be set separately anymore) according to the following
table:
Lo/Ro C dwnmx
: Sets
C_downmx
automatically to:
+3.0dB -3.0dB
+1.5dB -3.0dB
0.0dB -3.0dB
-1.5dB -3.0dB
-3.0dB -3.0dB
-4.5dB -4.5dB
-6.0dB -6.0dB
#Lo/Ro S dwnmx
Lo/Ro Surround Mix level. This setting indicates the level shift applied to
the surround channels when downmixing to a Lo/Ro output. When
extended BSI parameters are active, this parameter is used, and the
surround mix level parameter in the universal parameters is not. -1.5dB, -
3.0dB, -4.5dB, -6.0dB and -999dB. You can also choose to use the
metadata settings in the external program (
Ext_meta
, only usable when
the
MD_enc1
till
MD_enc4
are set to
MxA
till
MxH
). Default is –3dB.
This setting will automatically change the
S_downmx
metadata setting
Summary of Contents for DDP84
Page 34: ...34 9 Block Schematic...
