12
Out_1 ~ Out_4
With these settings you can select what the sources should be for physical
outputs 1 and 2, or bus outputs 1, 2, 3 and 4.
Out_1 = physical output 1 and bus output 1
Out_2 = physical output 2 and bus output 2
Out_3 = bus output 3
Out_4 = bus output 4
Following sources are selectable:
-
enc1
= Encoder 1
-
enc2
= Encoder 2
-
enc3
= Encoder 3
-
enc4
= Encoder 4
-
aes1/2
= First physical input (can be delayed in bypass mode)
-
aes3/4
= Second physical input (can be delayed in bypass mode)
-
aes5/6
= Third physical input (can be delayed in bypass mode)
-
aes7/8
= Fourth physical input (can be delayed in bypass mode)
-
bitstream
= Fifth physical input: Dolby Digital, Dolby E or PCM
(no bypass delay possible)
-
testtone
= Testone for testing the chain where the DDP is part of
Defaults for outputs 1, 2, 3 and 4 are respectively
enc1
,
enc2
,
enc3
and
enc4
.
The lines and blocks that are marked red in the following schematic are
done by this setting:
Summary of Contents for DDP84
Page 34: ...34 9 Block Schematic...
