Synapse DAD08 Manual Download Page 10

The DAD08/09 Card

 

Introduction 

The Axon DAD08 and DAD09 are Digital Audio Distribution 
Amplifiers that distribute a single input to eight outputs.  The 
DAD08/09 accept AES/EBU or SPDIF (Consumer Interface 
Format) digital audio input that is then reclocked, buffered and 
distributed to the eight outputs. The DAD08 has transformer 
coupled balanced input and outputs, whereas the DAD09 has a 
transformer coupled balanced input and direct balanced outputs. 

Multiple regenerated independent low jitter outputs make the 
DAD08 and DAD09 ideal for the most demanding digital audio 
signal distribution requirements in both large and small audio and 
video facilities. 

 

 

Key Features 

The Key features of the DAD08 and DAD09 are as follows: 

 

 

Wide Range Of 

Sample Rates 

The DAD08 and DAD09 offer a wide range of sample rates. 
Sample rates from 24 to 96 kHz are decoded and cleanly 
regenerated. Standard sample rates of 32, 44.1, 48, 88.2 and 96 
kHz are indicated. 

   

Signal Status 

Indication 

Signal status and error messages included in the audio data format 
are decoded and displayed. 

 

 

I/O Flexibily  

The DAD08 and DAD09 offer a wide range of input and output 
options depending on the choice of backplane, giving a high 
degree of system flexibility.  

Balanced Input: Both the DAD08 & DAD09 offer a  transformer 
coupled  balanced audio input when a backplane is used that 
supports the use of three-conductor connections e.g. BPL05. 

Balanced Output: The DAD08 offers transformer coupled balanced 
audio outputs, whereas the DAD09 offers direct balanced audio 
outputs when a backplane is used that supports the use of three-
conductor connections e.g.BPL05 

Unbalanced Input: Both the DAD08 & DAD09 can be used with 
an unbalanced audio input when a backplane is used that supports 
the use of BNC connectors e.g. BPL01 

Unbalanced Output: Both the DAD08 & DAD09 can provide 
unbalanced audio outputs when a backplane is used that supports 
the use of BNC connectors e.g. BPL01 

Levels and connectors are optimized for use with balanced XLR 
110 ohm cable or unbalanced BNC 75 ohm coaxial cable. 

 

Summary of Contents for DAD08




















Reviews: