614-00051 Rev 00
Attero Tech LLC 2018
1 – Overview
The Synapse D16Mio is a high performance, high channel density
networked audio interface supporting Dante™ with AES67
interoperability. The D16Mio features 16 channels of studio grade
microphone preamplifiers using THAT Corporation
™
mic preamp
technology, with up to 51 dB of digitally controlled gain in 3 dB
steps. Each mic input also supports P48 switchable phantom power
and a switchable pad for accommodation of pro line level inputs.
The balanced line level outputs feature digitally controlled output
attenuation from 0 to -100 dB. All I/O are available independently
via the Dante™/AES67 network audio interfaces. The D16Mio is
available in terminal block or DB-25 options for optimum ease of
connectivity and wiring.
The DM16Mio is also an excellent solution for:
o
Audio expansion for any DSP based AV system
o
House of worship and theatres
o
Analog and digital snake alternative
The front panel features an accessible integrated headphone amp
and a high contrast OLED display to provide quick and detailed
feedback for audio confidence monitoring and diagnostics.
The 24V power supply comes pre-mounted to the
DM16Mio
chassis but there is also support for a secondary external 24V DC
supply for optional power redundancy.
On the network side, there is a fully redundant Dante™ interface
utilizing both RJ45 connectors and SFP ports. The SFP ports allow
the
DM16Mio
to utilize direct fiber connectivity for long range
signal extension in physically large systems such as arenas, large
corporate buildings and convention centers.
Audinate’s Dante™ Controller or other 3rd party manufacturer's
Dante™ routing software can be used to control the Dante™ audio
routing configuration of the device while the Attero Tech unIFY
Control Panel application can be used to configure the device-
specific features.
1.1 – What’s in the Box
The Synapse DM16Mio comes supplied with the following:
o
Synapse DM16Mio device
o
AC Mains power cord
1.2 – Optional Extras
The following are available as options for the Synapse D16Mio and
may be ordered separately:
o
24V DC Redundant Power Supply ( P/N: 256-00014-01)
o
1Gbit Fiber SFP Module ( P/N: 065-00038-01)
