Symphony Cooler
Maintenance
Electrical
No general maintenance is required to the electrical system.
Electrical connections and maintenance should only be carried out by a qualified
electrician.
End of Season
If the Evaporative Cooler will not be used for a long time:
•
Make sure all parts are dry by running nly the Motor during 2 hours before storing (time
depends on ambient humidity conditions)
•
Switch OFF the Motor and unplug the evaporative cooler from the power supply
•
Drain all the water from tank, remove the Side Pads and clean the water tank with a damp
cloth to wipe away any dust or mineral deposits finally replace the Side Pads.
•
To protect model from dust, moisture or scratches, cover with a clean cloth, tarp or plastic
bag before storing.
•
Roll the power cord and store it away from the floor to protect it.
•
Store this model at room temperature in a dry location, away from direct sunlight and/or very
hot, cold or damp environments.
Page
13
