Maintenance
Cleaning of cooler by draining the water
To drain the left over water from the tank pull to remove the drain plug given at
the lower back side of the tank. After draining, push to fix the drain plug properly.
It is advisable to drain water on regular basis for better performance & longer life
of pads
1. Disconnect the power cord before servicing or maintenance.
2. Do not make loose wiring or inferior material in servicing or maintenance to avoid fire hazard.
3) Please stop the device and contact to the authorized service provider in case of electric shock found on cooler.
4) Please disconnect the power supply before opening any cover to avoid injury due to rotating part / electric shock
5) To clean the tank remove drain plug from bottom side. Drain out all the residual water. Draining out of stagnant water
from tank is necessary to keep your environment hygienic.
6) To clean the cooling pad, please unplug the cooler; apply water on cooling pad from outside. Do it at least once in a
year , depending on the surrounding environment.
7) Under no circumstances, customer should open the cooler.
8) In case of any difficulties, please contact symphony authorized service provider.
Trouble
Less Cooling
Water Leakage
Fan not Working
Shock on Cooler
Cause
Pump is switched OFF
Humidity control OFF
(Selected models)
Drain plug is displaced
Grill lock is disengaged
Cooling pad is sagged
Airflow switch is turned OFF
Loose contact at socket
Switch or Motor Malfunction
Device malfunction
Remedy
Switch ON the pump
Ensure that the humidity control knob is ON.
Ensure that the drain plug is positioned properly
Relock the grill
Change the cooling pads
Switch ON the fan by selecting the required speed
Rectify faulty wiring / Socket in the house
Call the nearest service provider
Call the nearest service provider
Trouble Shooting
Note : The blower/fan motor comes equipped with thermal overload protection.
6
