How to install and operate product
Take the cooler out from carton, Remove all
protective covers. Place the cooler in front of an open
window or install in a window for effective cooling.
Select models can also be placed on trolleys. Do not
use cooler in a closed room.
Ensure power supply is as specified for the cooler.
There should not be any spikes in supply voltage. For
operating on inverter, the cooler need to be
connected to only sine-wave inverter of appropriate
rating.
Disconnect the power cord while filling the water.
Pour water by lifting the lid on top or through front or
through spout at the back. You may also add ice
cubes for faster cooling. Water may be poured up to
the highest point (or F) of the water level indicator.
You may keep a small container below over flow
hole, to avoid spillage of water on your floor/carpet.
For longer life of pump, always operate it with
sufficient water in the tank.
2
FLOAT VALVE
You may pull to remove over-flow plug given in select
models to allow over-flow of water. By doing so the
tank capacity will be reduced marginally.
Over flow plug
Float valve facility is available in select models. Make
provision for automatic water filling to the cooler.
Ensure proper connection of water inlet pipe into the
float valve to avoid leakage.
