5-2
L2403EA
2. Initial Setting
General
1. Enter the Service mode. (See page 5-1)
2. Press "VOL
p
" button on the service remote control
unit. Display changes "C/D," "7F," "LANGUAGE,"
"ACCESS CODE," "SOUND TYPE," "VIDEO
TONE," "FM MODE," "V-OUT," "VIDEO," "AV
MEMO," "STABLE SOUND," "FILTER," "1000,"
"YUV MEMORY," "NO SIG BRT," "A-MUTE POL,"
and "V-MENU" cyclically when "VOL
p
" button is
pressed.
3. To set the following each data value, press "CH
o
/
p
" buttons on the service remote control unit.
7F --- Set to "FF."
LANGUAGE --- Set to "SPA/FRA."
ACCESS CODE --- Set to "OFF."
SOUND TYPE --- Set to "MONO."
VIDEO TONE --- Set to "ON."
FM-MODE --- Set to "OFF."
V-OUT --- Set to "OFF."
VIDEO --- Set to "V1."
AV MEMO --- Set to "OFF."
STABLE SOUND --- Set to "OFF."
FILTER --- Set to "OFF."
Adjusting the monitoring time
--- Set to "1000."
YUV MEMORY --- Set to "OFF."
NO SIG BRT --- Set to "0."
A-MUTE POL --- Set to "L."
V-MENU --- Set to "OFF."
3. Setting for BRIGHT, CONTRAST,
COLOR, TINT, and SHARPNESS
Data Values
General
1. Enter the Service mode. (See page 5-1)
2. Press "MENU" button on the service remote control
unit. Display changes "BRT," "CNT," "CLR," "TNT,"
"V-TNT," and "SHARP" cyclically when "MENU"
button is pressed.
CNT
1. Press "MENU" button on the service remote control
unit. Then select "CONTRAST" (CNT) display.
2. Press "CH
o
/
p
" buttons on the service remote
control unit so that the value of "CONTRAS" (CNT)
becomes 84.
CLR
1. Press "MENU" button on the service remote con-
trol unit. Then select "COLOR" (CLR) display.
2. Press "CH
o
/
p
" buttons on the service remote
control unit so that the value of "COLOR" (CLR)
becomes 58.
TNT
1. Press "MENU" button on the service remote con-
trol unit. Then select "TINT" (TNT) display.
2. Press "CH
o
/
p
" buttons on the service remote
control unit so that the value of "TINT" (TNT) be-
comes 60.
V-TNT
1.
Press "MENU" button on the service remote con-
trol unit. Then select "V-TINT" (V-TNT) display.
2.
Press "CH
o
/
p
" buttons on the service remote
control unit so that the value of "V-TINT" (V-TNT)
becomes 60.
SHARP
1. Press "MENU" button on the service remote con-
trol unit. Then select "SHARPNESS" (SHARP) dis-
play.
2. Press "CH
o
/
p
" buttons on the service remote
control unit and select "43."
Note:
BRIGHT
data value does not need to be adjust-
ed at this moment.
