Symmons Industries, Inc.
■
31 Brooks Drive
■
Braintree, MA 02184
■
Phone: (800) 796-6667
■
Fax: (800) 961-9621
Copyright © 2019 Symmons Industries, Inc.
■
symmons.com
■
■
ZV-3205 REV D
■
090519
Installation
7) Attach supply lines to IPS inlet
connections (I). Using a wrench,
finish with one-half turn.
DO NOT
overtighten.
I
1
1
2
8) Attach supply lines to shut-off
valves and hand tighten. Using a
wrench, finish with one-half turn.
DO NOT
overtighten.
1
1
2
9) Turn on water supplies. Remove
aerator (H) and flush lines free of
debris. Check for leaks.
2
1
H
Maintenance
1) Turn off water supply. Loosen and
remove the handle set screw (B),
handle (A), collar (C) and nut (D).
A
C
D
2
3
4
B
1
2) Remove cartridge (F, G) and inspect
for debris. Replace cartridge if
necessary.
3) Install cartridge following steps
1 & 2 in reverse.
F G
Problem
Cause
Solution
Finish is spotting.
Elements in water supply may cause
water staining on finish.
Clean finished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then quickly
rinse with water.
Troubleshooting Chart
WARNING:
This product can expose you to chemicals including lead, which is known to the state of California to
cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.