Identity
™
Model Numbers
Shower/Hand Shower System
Operation & Maintenance Manual
6705
Modifications
Specification
6705
Identity Shower/Hand Shower System
Warranty
Limited Lifetime
- to the original end purchaser in
consumer/residential installations.
5 Years
- for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Compliance
Certified by
CSA Group
Shower/hand shower system powered by the Temptrol
®
pressure-balancing valve. Features adjustable stop screw
to limit handle turn, separate two function diverter, wall
elbow, in-line vacuum breaker, 60" flexible metal hose,
hand shower cradle, 1 mode hand shower, 1 mode
showerhead with easy to clean rubber nozzles and
standard 2.5 gpm (9.5 L/min) flow restrictors. Components
made from metal and nonmetallic materials, plated in
standard polished chrome finish.
Note:
Append appropriate -suffix to model number.
For California Residents
WARNING:
This product contains chemicals known to the
State of California to cause cancer, birth defects, or other
reproductive harm.
-1.5
1.5 gpm (5.7 L/min) flow restrictor
-2.0
2.0 gpm (7.6 L/min) flow restrictor
-72
6' metal hose in place of 5' standard
metal hose
-143
3 mode showerhead
-145
5 mode showerhead
-231
2 mode showerhead
-B30
30" slide bar in place of wall cradle
-B48
48" slide bar in place of wall cradle
-CHKS
Integral check stops - for use in
installations where a positive shut-off
device is used downstream of mixing valve
-IPS
1/2" female IPS connections
-L/HD
Less showerhead
-L/HS
Less hand shower
-LP
Loop handle
-LR
Lever handle
-OP
13" oval plate
-QD
Quick disconnect on hand shower units
-R
White vinyl hose in place of metal hose
-REB-TRM
Rebuild trim kit
-REV
Reverse coring, hot on right, cold on
left, for back to back installations
-STN
Satin Nickel finish
-T724
24" slide / grab bar with ADA hand
shower in place of standard hand
shower unit
-T736
36" slide / grab bar with ADA hand
shower in place of standard hand show-
er unit
-TRM
Trim only, valve not included
-X
Integral service stops - allows water
shutoff at valve for service
CG
-ASME A112.18.1/CSA B125.1
-WaterSense 1.5 gpm (5.7 L/min)
2.0 gpm (7.6 L/min)