4
Note:
For valve body installation, please
see valve body manual.
1
M
N
M
2
1) Install shower mounting plate (N)
to shower valve. Secure with two
screws (M).
2) Attach shower escutcheon (L) to
shower mounting plate (N).
L
N
Note:
Tabs should snap into place.
I
1
J
2
4) Install shower handle (I) to shower
valve. Secure shower handle with
set screw (J).
Note:
Handle should be facing the 6
o’clock position.
Installation
1
3
C
4
P2
P3
P1
P2
2
Note:
For dry wall 1/2" thick or less,
insert anchor tool (P3) into drywall
anchor (P2) to secure behind wall
prior to installing wall cradle.
7) Place mounting plate (C) in
position, mark and drill 3/16" holes
for tile anchors (P1), 5/16" holes
for drywall anchors (P2). Install
anchors.
5) Install tub spout (O) to pipe fitting
Turn clockwise to tighten.
O
1
2
8) Remove cover of hand shower
cradle (E). Install cradle and
mounting plate (C). Secure with
three screws (F). Replace cover on
hand shower cradle.
1
2
4
E
F
C
3
3) Install dome cover (K) to shower
valve by turning clockwise.
K
1
2
6) Install wall ell (B) to pipe fitting.
Tighten set screw (D) to secure.
B
1
1
D
2