Symmons Identity 6703 Operation & Maintenance Manual Download Page 1

Identity

Model Numbers

6703, 6704

Operation & Maintenance Manual

Specification

Modifications

6703

Identity Hand Shower System

6704

Identity Tub/Hand Shower System

Warranty

Limited Lifetime

 - to the original end purchaser in 

consumer/residential installations.

5 Years

 - for industrial/commercial installations.

Refer to www.symmons.com/warranty for complete 
warranty information.

Compliance

Certified by
CSA Group

6703

Hand shower system powered by the Temptrol

®

 pressure- 

balancing valve. Features adjustable stop screw to limit 
handle turn, wall ell, in-line vacuum breaker, 60" flexible 
metal hose, hand shower cradle, 1 mode hand shower and 
standard 2.5 gpm (9.5 L/min) flow restrictor. Components 
made from metal and nonmetallic materials, plated in 
standard polished chrome finish.

6704

Tub/hand shower system powered by the Temptrol

®

 

pressure-balancing valve. Features adjustable stop screw 
to limit handle turn, diverter tub spout, wall ell, in-line 
vacuum breaker, 60" flexible metal hose, hand shower 
cradle, 1 mode hand shower and standard 2.5 gpm 
(9.5 L/min) flow restrictor. Components made from metal 
and nonmetallic materials, plated in standard polished 
chrome finish.

Note: 

Append appropriate -suffix to model number.

-1.5

1.5 gpm (5.7 L/min) flow restrictor

-2.0

2.0 gpm (7.6 L/min) flow restrictor

-72

6' metal hose in place of 5' standard 
metal hose

-B30

30" slide bar in place of wall cradle

-B48

48" slide bar in place of wall cradle

-CHKS

Integral check stops - for use in 
installations where a positive shut-off 
device is used downstream of mixing valve

-IPS 

1/2" female IPS connections

-L/HS

Less hand shower

-LP

Loop handle

-LR

Lever handle

-OP

13" oval plate

-QD

Quick disconnect on hand shower units

-R

White vinyl hose in place of metal hose

-REB-TRM

Rebuild trim kit

-REV

Reverse coring, hot on right, cold on 
left, for back to back installations

-SS

Slip spout on any tub/hand shower unit

-STN

Satin Nickel finish

-T724

24" slide / grab bar with ADA hand 
shower in place of standard hand show-
er unit

-T736

36" slide / grab bar with ADA hand 
shower in place of standard hand show-
er unit

-TRM

Trim only, valve not included

-X

Integral service stops - allows water 
shutoff at valve for service

CG

For California Residents

WARNING:

 This product contains chemicals known to the 

State of California to cause cancer, birth defects, or other 
reproductive harm.

-ASME A112.18.1/CSA B125.1
-WaterSense 1.5 gpm (5.7 L/min)

2.0 gpm (7.6 L/min)

Summary of Contents for Identity 6703
















Reviews: