Symmetricom TimeProvider 500, User Manual

Page: 114 / 174

114 TimeProvider 500 2.0 User’s Guide 098-00172-000 Revision A – December, 2009
Chapter 4 CLI Commands
Show Commands
Response:
Timescale : UTC
Timezone offset : 00:00
Example:
TP-500> show clock status
Response:
Time is: 23:43:32 11/12/2009 (UTC)
show correction
This command shows average correction value in PTP packet.
Syntax:
TP-500> show correction
Response:
GM forward corr : 0 ns
Acc-GM forward corr : 0 ns
Delay corr : 0 ns
show eia-232
This command shows the baud setting for the serial port on theTimeProvider 500.
Syntax:
show eia-232 baud
Response:
Baud : 57600
Parity : none
Data bits : 8
show firewall
This command shows the current firewall settings.
Syntax:
TP-500> show firewall
Response:
ICMP is Allowed
Telnet is Allowed