![background image](http://html.mh-extra.com/html/symlin/symlinpen-120/symlinpen-120_manual_1419571004.webp)
Selecting your routine dose:
Step 8:
•
Turn the dial to select the correct dose you need to inject.
Step 9:
•
Pull the knob straight out as far as it will go. You should hear a
“clicking” sound while you are pulling the knob out.
Step 10:
•
Turn the knob forward or backward until you see the correct
dose you need to inject.
•
Check that you see the line to make sure you have loaded
your full dose. You should see a line, arrow, and the number
of your dose.
°
If you do not see a line, arrow, and the number of your
dose,
do not
inject the dose. Point the needle away from
you, push the knob all the way in until it stops, then repeat
Step 8 to Step 10.
°
Once the knob has been pulled out, the dial will not move
and you cannot reset your dose. If correct dose was not
selected, push in the knob to discard the dose and repeat
the instructions. If the knob is pushed in all the way, and
you cannot turn the dial, call Information Support.
Giving your SYMLIN injection:
•
Inject your SYMLIN exactly as your doctor has shown you.
•
Change (rotate) injection sites for SYMLIN. Inject SYMLIN at a
site that is more than 2 inches away from your insulin injection.
Do not
inject SYMLIN and insulin in the same site.
•
To help reduce the chances of getting a reaction at the injection site,
let SYMLIN come to room temperature before you inject it.
Figure K
Figure L
Figure M
Figure N