Step 4:
•
Pull off the outer needle cover.
Do not
throw it away.
•
Pull off the inner needle cover and throw it away.
New Pen Setup - Priming your SymlinPen:
Note:
•
Steps 5 through 7 are
only
required if you are using your SymlinPen
for the first time.
Do not repeat Step 1 through 4 before each dose.
•
If you have already primed your SymlinPen, go to Step 8
for
instructions about giving your scheduled dose.
Step 5:
•
Turn the dial to select 60 mcg.
°
You should see the number 60 in the window.
Step 6:
•
Pull the knob straight out as far as it will go. You should hear a
“clicking” sound while you are pulling the knob out.
Step 7:
•
Hold your SymlinPen with the needle pointing up. Push the
knob all the way in until it stops. You should hear a “clicking”
sound while you are pushing the knob in.
°
A stream of liquid should be seen from the needle.
•
If you
do not
see a
stream of liquid,
repeat Step 6 and
Step 7 (you may repeat
up to 3 times).
•
If you
still do not
see a
stream of liquid after
3 attempts, change
the needle and repeat
Step 6 and Step 7.
If you still do not see
a stream of liquid,
call Information
Support.
Figure I
Figure G
Figure H
Figure J