manualshive.com logo in svg

Symcode BROCHURE, User Manual

Share
Download
Symcode BROCHURE User Manual Download Page 10

                                                   

 

3rd Chapter

:Parameters

2

2D Desktop Barcode Scanner

Physical Characteristics

 Dimensions：152mm x 152.5mm x81.5mm                Power Voltage：5V
Weight：550g                                                         Curent of Power ON：380mA
Stanby Current：：190mA                                       Working Current：240mA

Performance Characteristics

Light Source：Warm Yellow LED                              Interfaces Supported：USB，USB-COM, RS232
Image (Pixels)：1024 pixels (H)x 1280 pixels (V)           Roll / Pitch / Yaw：360°, ±65° , ±65°

User Environment

Symbology Decode Capability

Decode Ranges

Operating Temperature：-20°C to 60°C           
Storage Temperature：-30°C to 70°C
Humidity：5% to 95% relative hum idity,non-condensing                           
Ambient Light：It will not affect the normal office and factory lighting environment or direct 
exposure to sunlight
Drop Test:  Can withstand the impact of multiple drops from a height of 0.7 meters to 
mixed ground
Electrostatic Discharge:     Meet the requirements of 15kV air discharge and 8kV contact discharge

1-D: Codabar, Code 11, Code 39, Code 93, Code 128/EAN128, EAN.UCC Composite, 
Interleaved 2 of 5,MSI Code, Planet, Plessey Code, Postnet, RSS, 
Standard 2 of 5, Telepen, UPC/EAN, etc.

Code39(5mil)：0mm-120mm          Code39(13mil)：0mm-240mm
UPC-A(13mil)：1-17cm                                QR(20mil)：0-13cm
QR(20mil)：0mm-210mm

*Min distance of scanning depend of scan angle and code length
*Payment code of Alipay and Wechat depeng on the phone brightness

2-D: PDF417, QR code, Matrix 2 of 5, MicroPDF417, Australian Post, Canada Post,
Japan Post, MaxiCode, Codablock, Aztec, Dutch Post, TLC 39,DataMatrix, etc.

Summary of Contents for BROCHURE

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands