9
Q
u
i
c
k
R
e
f
e
r
e
n
c
e
1. Press the power button on the front panel of your SPT 1800
to display the Welcome utility (This also displays following a
hard reset).
Note:
If necessary, adjust the contrast control on the SPT
1800 so the screen is clear and readable. See
for instructions.
2. Follow the instructions on the screen.
3. Tap the exact center of each target
that appears on the screen with the
tip of the stylus.
If, at any time you need to recalibrate the
screen, open the
Preferences
application, tap
General
on the top right
corner of the screen and select the
digitizer
option from the pull down menu.
Using the SPT 1800
Power Button/Backlight Control
The power button turns the SPT 1800 on and off. This button also
serves as your backlight control for low-light conditions. When the
SPT 1800 is on, press and hold the power button for
approximately two seconds to turn the backlight on and off.
Power
Button
