8
S
P
T
1
8
0
0
S
e
r
i
e
s
3. Plug the power cable into a wall outlet and plug the other end
into the battery charging receptacle on the side of the Syn-
chronization/Charging Cable.
The battery is fully charged after approximately two hours.
Starting the SPT 1800
Press the red power button to power on the terminal. If the terminal
does not power on, perform a hard reset. See
Calibrating the Screen
The first time you start your SPT 1800, the Welcome utility
appears. Follow the steps to align the internal circuitry of your SPT
1800 with its touch-sensitive screen, and to set the current time
and date.
Note:
If your SPT 1800 unit came pre-loaded with a custom
software application, you may not need to calibrate
your screen, in which case you will not see the Wel-
come utility.
Battery
Charging
Receptacle
Power
Supply
Serial Cable
