4-17
Spectrum24 RF Terminal Setup
4. The 6840 displays:
Program loader
WARNING: EEPROM WILL
BE ERASED
CONTINUE?
<ENT>
Note: To cancel this operation, press <CLEAR>.
5. Press <ENTER> to erase the EEPROM.
Wait while the EEPROM is erased. When complete, the program prompts for the
communications parameters.
6. Set the parameters to 38,400 bps, 7 data bits, odd parity, and no flow control. Press
<ENTER>.
Start Communications
1. The 6840 displays:
Comm Parameters
Start? <ENT>
2. Press <ENTER> on the 6840.
3. The 6840 displays:
Comm Parameters
Receiving: XXXX
If the host is not ready or if the cable is not connected properly between the host PC
and the cradle, the 6840 displays:
Awaiting DSR
4. Press <ENTER> on the host PC to start the download. The 6840 displays:
Program loader
Status XXXX
Summary of Contents for Series 6800
