•
Make sure the PTC is off before you connect
or remove any cables or accessories or replace
the battery pack.
•
Make sure all accessories connected by cable
are connected correctly and the correct cables
are used.
•
Use only Telxon-approved battery packs and
accessories. Do not attempt to connect any
electrical device that is not part of your PTC-
960XRF system to the PTC.
•
Protect the PTC from excessive heat, cold,
moisture, and harsh, dirty environments.
•
Do not insert anything other than Telxon-
approved cables into the accessory connector
on the PTC’s left side.
•
Be careful not to short together any of the
metal contacts on the PTC’s nose. Do not
allow the contacts to touch metal or other
electrically conductive material.
•
Do not remove any rubber or plastic plugs on
the PTC’s case.
©
Storing the PTC-960XRF
•
Do not store the PTC-960XRF in tempera-
tures below -40 degrees F (-40 degrees C) or
above 158 degrees F (70 degrees C).
•
Do not store the PTC-960XRF in a damp or
humid environment.
Use the following procedure to store the
PTC-960XRF.
1. Transfer any data stored in the PTC to a host
computer or another PTC or print the data.
41