Symbol P 370, Quick Reference

Page: 8 / 34

Preliminary
6
P 3 7 0 / 4 7 0 S c a n n e r
scan data until this linking is complete.
• At that time, through the scanner’s contact shoe, there is an
exchange of information (addressing, RF channels, etc.) be-
tween the scanner and the base/charger’s cradle. This occurs in
less than a second.
• After the exchange is complete, the scanner and base/charger
are paired. Successful pairing is indicated by as warble beep;
failure, or unsuccessful link, is indicated by a Lo Lo Lo Lo
beep.
Set Host Type
Each Interface Cable Assembly defaults to a given host. Below is a
list of the assemblies and their corresponding default hosts. If you
wish to change the type of host, find and scan the proper bar code
on the following pages.
Cable Assy. Default
IK-0100, -0101 IBM 4683/93 Port 5B; 4683/84 Port 17
IK-1005, -1006 ICL 9505, 9507, 9518; 9520 OCIA
IK-0200 IBM 3683, 3684 Keybd Wedge
IK-0300 IBM 3653 Kybd Wedge
IK-0400 IBM PC/AT, Telex Memorex Kybd Wedges
IK-0401 IBM PS/2 - 30, 50, 55SX, 60, 70, 80
IK-0402, -0403 NCR 7052 Wedge; Fujitsu 9000 Wedge
IK-0406, -0409 IBM 3161/319X; IBM 3151, 347X Wedges
IK-0413 Wyse 50 Wedge
IK-0500 NCR 2152 Tel Kybd Wedge
IK-0600 NCR 2151 Tel Kybd Wedge
IK-0700 NCR 280 Kybd Wedge
IK-0800 — 0803 Standard RS-232C
IK-0900 Fujitsu 9000 OCR
IK-0901 Fujitsu 7770, 7880, 7990, 8770 OCR
IK-0902 IBM 3653, 3683/3684 OCR
IK-1001, -1002 NCR 2152, 2257, 2950; 215X, 7050 OCIA
IK-1003, -1004 Nixdorf 8812 OCIA; NCR 2126-1120 OCIA