Symbol P 370, Quick Reference

Page: 4 / 34

Preliminary
2
P 3 7 0 / 4 7 0 S c a n n e r
A full charge takes up to 4 hours, you may need less time depending
upon the remaining charge in the battery. The LED light on the
bottom of the cradle becomes solid to alert you when the battery has
been recharged.
Scanning with the Phaser
For POS operation, the scanner ships with a default application that
is ready-to-use right out of the box. Otherwise, consult the Phaser
Series Scanner Product Reference Guide (p/n 72-33495-xx) for
programming instructions. If you need assistance, contact your
local supplier or Symbol Support Center.
1. Ensure the battery is charged.
2. Make sure the bar code is in the correct scanning range. Aim
and press the trigger. When the scanner has read the symbol:
- You hear a beep.
- The LED above the screen turns green.
- The red laser turns off.