Symbol MicroKiosk MK1000, Product Reference Manual

Page: 94 / 240

3-48
MK1000 MicroKiosk Product Reference Guide
Table 3-16. RF Settings Screen Definitions
Field Name Description
ESS ID Press the Previous or Next buttons to move the "<"
cursor to this field to set the ESS ID.
The default ESS ID for the MK1000 is 101.
Note: ESS ID is a 32-character field however this
screen does not display the full 32 characters. To
view all 32 characters, if applicable, it is
recommended that you use a Telnet session to
configure the ESS ID remotely. For more
information about Telnet, see
Configuration via a
Telnet Session on page 3-63
.
Encryption Press the Previous or Next buttons to move the "<"
cursor to this field to set the encryption mode.
The default encryption mode for the MK1000 is
Disabled. To toggle the field setting to select OPEN
KEY, 40-BIT or 128-BIT modes, press the Enter
button.
Key ID Press the Previous or Next buttons to move the "<"
cursor to this field to set the active key.
The default active Key ID for the MK1000 is key
(button) ‘1’. To toggle the field setting to select key
‘2’, ‘3’, or ‘4’, press the Enter button.
Key Management When selected, the Key Management option
displays the
Encryption Keys screen. From this
screen the user can set various key (button) values
in Hexadecimal form.
Radio Status When selected, the Radio Status option displays
the
Radio Status screen (see Figure 3-41 ). From
this screen the user can view the RF Mac address,
the AP Mac address, Link, Channel, TxRate, Port,
CQ, ASL and ANL.
Note: This option is only available when an 11 MB
radio is installed.