manualshive.com logo in svg

Symbol MC9000-K/S, Reference Manual

Share
Download
Symbol MC9000-K/S Reference Manual Download Page 232

MC9000-K/S with Windows

®

 Mobile 2003 Software for Pocket PCs PRG

4-16

3.

Click 

OK

.

Before communicating through an Ethernet connection, create a partnership 
between the mobile computer and the host computer via a USB connection. 
See 

Setting up a Partnership on page 4-4

 for detailed instructions.

DHCP Server Configuration

If you use a DHCP server to distribute IP addresses and other network parameters, the server setup 
should include the following:

•

IP address pool (1 or 5 IP address per cradle)

•

Router/gateway address

•

One or more DNS server addresses

•

One or more WINS server addresses

•

Subnet mask.

To assign the initial cradle IP address, you can either use a DHCP server, as 
shown above, or use the MobileDox Cradle Manager (see 

Installing 

MobileDox Cradle Manager on page 4-13

). The DHCP server is the preferred 

method.

Cradle Configuration

The MobileDox Cradle Manager allows you to setup the Device IP Address and modify cradle 
settings. See 

Installing MobileDox Cradle Manager on page 4-13

 for instructions to download and 

install the software.

See 

Figure 12-17 on page 12-28

 for instructions on Four Slot Ethernet cradle connections.

Setting the Device IP Address

By default, the cradle uses DHCP to obtain its IP address. However, if DHCP fails, the Cradle Manager 
can assign an IP address. 

This is used if the cradle is connected to the network, but fails to appear in 
MobileDox. Enter the hardware device (MAC) address to locate the cradle 
and assign it a new IP address.

Summary of Contents for MC9000-K/S















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands