Symbol LS3478-ER, Reference Manual

Page: 162 / 371

Scanner Emulation Interface 10-9
Convert Newer Code Types
The scanner supports a variety of code types that attached decoder systems typically cannot decode. To allow compatibility in these
environments, the scanner converts these code types to more common symbologies, as per the following table. Symbologies not
listed on this chart are transmitted normally.
When decoding these code types with this parameter disabled, the scanner issues convert error beeps and transmits no data.
*Convert Newer Code Types
Reject Newer Code Types
Module Width
The standard module width is 20 µs. For an extremely slow decoder system, use this parameter to extend this module width to 50 µs.
*20 µs Module Width
50 µs Module Width
Scan this code type: Transmitted as:
Code 11 Code 39
GS1 DataBar (14, Limited, and Expanded) Code 128