Symbol LS3008, Quick Reference Manual

Page: 5 / 20

Quick Reference Guide 5
Beeper Definitions
The scanner issues different beep sequences and patterns to indicate
status. The table below defines beep sequences that occur during both
normal scanning and while programming the scanner.
Beeper Sequence Indication
Standard Use
Low/medium/high beep Power up.
Short high beep A bar code symbol was decoded (if decode beeper is
enabled).
4 long low beeps A transmission error was detected in a scanned
symbol. The data is ignored. This occurs if a unit is not
properly configured. Check option setting.
5 low beeps Conversion or format error.
Low/high/low beep ADF transmit error.
High/high/high/low beep RS-232 receive error.
Parameter Menu Scanning
Short high beep Correct entry scanned or correct menu sequence
performed.
Low/high beep Input error, incorrect bar code or “Cancel” scanned,
wrong entry, incorrect bar code programming
sequence; remain in program mode.
High/low beep Keyboard parameter selected. Enter value using bar
code keypad.
High/low/high/low beep Successful program exit with change in the parameter
setting.
Low/high/low/high beep
Out of host parameter storage space. Scan
Set
Defaults on page 8
.
Code 39 Buffering
High/low beep New Code 39 data was entered into the buffer.
3 Beeps - long high beep Code 39 buffer is full.