Symbol LS 6000 Series, Product Reference Manual

Page: 17 / 175

LS 6000 Series Product Reference Guide
1-2
! LS 6005-I000 (IBM 468X/469X) - The LS 6005 is fully
compatible with the entire line of IBM 468X/469X
terminals. It also accommodates the full line of Synapse
Smart Cables.
! LS 6005-I090 (IBM 468X/469X with EAS) - The LS
6005-I090 also provides additional signal lines for EAS
deactivation (Checkpoint modes V and VII).
Using Your Scanner
If the scanner is powered by the host, ensure the host is
connected to a power outlet. When power is applied to the host,
the scanner powers up.
If the scanner is powered by an external power supply, ensure
the power supply is connected to a power outlet. When the
power supply is connected to the scanner, the scanner powers
up.
The green LED on top of the scanner illuminates and 3 power-
up beeps sound, indicating the scanner is operational.
The LS 6000’s LED and beeper indicate scanning activity. These
indications are described in
LED Indications and Beeper
Indications on page 3-5 .
If the scanner is inactive for more than a pre-programmed
length of time, it enters a low power “rest” mode to conserve
energy. When you need to scan again, just bring a bar code to
the scanner window to “wake up” the scanner.