Symbol LS 3408, Product Reference Manual

Page: 287 / 432

Advanced Data Formatting 14-31
Setup Field(s)
Table 14-1. Setup Field(s) Definitions
Parameter Description Page
Move Cursor
Move Cursor To a Character
Scan the
Move Cursor To Character bar code on page 14-32
,
then any printable ASCII character from the Alphanumeric
Keyboard . When this is used, the cursor moves to the
position after the matching character. If the character is not
there, the rule fails and ADF tries the next rule.
14-32
Move Cursor to Start of Data Scan this bar code to move cursor to the beginning of the data. 14-32
Move Cursor Past a Character This parameter moves the cursor past all sequential occurrences
of a selected character. For example, if the selected character is
‘A’, then the cursor moves past ‘A’, ‘AA’, ‘AAA’, etc. Scan the
Move Cursor Past Character bar code on page 14-32, then
select a character from the Alphanumeric Keyboard . If the
character is not there, the cursor does not move (i.e., has no
effect).
14-32
Skip Ahead “N” Characters Scan one of these bar codes to select the desired number of
positions to move the cursor ahead. 14-33
Skip Back “N” Characters Scan one of these bar codes to select the desired number of
positions to move the cursor back. 14-35
Send Preset Value Send prefix and/or suffix value by scanning the appropriate bar
code. These values must be set using the Scan Prefix and Scan
Suffix bar codes on
page 13-6 .
14-37