Symbol DS 3408, Product Reference Manual

Page: 40 / 406

3 - 4 Symbol DS3408 Product Reference Guide
Technical Specifications
Digital scanner emits lo/hi/lo beeps. Clearing Code 39 buffer. Normal when scanning the Code 39
Buffering
Clear Buffer bar code or
upon attempt to transmit an empty
Code 39 buffer.
Digital scanner emits a power-up beep
after changing USB host type. The USB bus re-established power to
the digital scanner. Normal when changing USB host
type.
Digital scanner emits one high beep
when not in use. In RS-232 mode, a <BEL> character
was received and Beep on <BEL>
option is enabled. Normal when Beep on <BEL> is
enabled and the digital scanner is in
RS-232 mode.
Table 3-1
Troubleshooting (Continued)
Problem Possible Causes Possible Solutions
NOTE If after performing these checks the digital scanner still experiences problems, contact the distributor or
Motorola Enterprise Mobility Support. See
page xv for the telephone numbers.
Table 3-2
Technical Specifications
Item Description
Power Requirements 5 VDC + / - 10% @ approximately 220 mA RMS (nominal), 500 mA (max)
Power Source Depending on host:
•
Host powered
•
External power supply, 5.2 V nominal
Decode Capability UPC/EAN, UPC/EAN with supplementals, UCC/EAN, JAN 8 & 13, 128, Code 39,
Code 39 Full ASCII, Code 39 Trioptic, Codabar (NW7), Interleaved 2 of 5,
Discrete 2 of 5, IATA 2 of 5, Code 128, Code 93, MSI, Code 11, Code 32, Coupon
Code, Bookland EAN, GS1 DataBar, Inverse 1D, US Postnet, US Planet, UK
Postal, Japan Postal, Australia Postal, Dutch Postal, 4State Postal, Composite
Codes, PDF417, MicroPDF, Maxicode, DataMatrix (ECC 200), DataMatrix
Inverse, QR Code, MicroQR, QR Inverse, Aztec, Aztec Inverse, DPM (DPM
version only).
Beeper Operation User-selectable: enable, disable
Beeper Volume User-selectable: three levels
Beeper Tone User-selectable: three tones
Yaw Tolerance ± 50° from normal
Pitch Tolerance ± 60° from normal
Roll Tolerance ± 180° from normal