3
Q u i c k R e f e r e n c e
Hinweis: Benutzen Sie nur eine Symbol Technologies
genehmigt Stromversorgung p/n 50-14001-005 in
den Ausgabe: 15Vdc und minimum 2.5A. Die
Stromversorgung ist bescheinigt nach EN60950 mit
SELV Ausgaben
1. Connect the power supply cord round plug to the power con-
nector on the side of the cradle.
2. Connect the pow-
er supply cord AC
plug to a standard
electrical outlet.
Upon power-up,
the LEDs flash
green-yellow-red,
then dark in se-
quence from left
(slot 1) to right
(slot 4).
Inserting and Removing the Terminal
W
ARNING
DO NOT allow metal to short the exposed contacts on the
toe of the battery while the battery is installed in an operating
terminal. Doing so may cause the terminal to stop operating
and lose contents.
If contacts are inadvertently shorted, remove and install the
battery before restarting the terminal. If the terminal still does
not power up, momentarily place the battery in a charger, ei-
ther in this cradle with the terminal, or in a UBC charger.
