3
Q u i c k R e f e r e n c e
Connecting to Power
The cradle provides power to a PPT 2700 or PPT 2800 terminal,
and re-charges terminal batteries.
To connect the cradle to a power source:
1. Connect one end of the power input cable to the power port
on the back of the cradle.
2. Connect the other end of the power input cable to a wall
outlet, as shown below.
3. To see if the cradle has power, insert and power on a terminal.
-
If the Terminal Status LED turns red, the cradle has pow-
er. Note that if the battery is already fully charged the
LED turns green.
-
If the Terminal Status LED does not react, the cradle may
not be receiving power, or the terminal may not be com-
municating with the cradle. For more information, see
Inserting the Terminal
Insert the terminal as shown below. When inserted correctly:
•
the bottom of the terminal fits smoothly into the cradle.
Serial Port
Power Port
Power Input
Cable
