manualshive.com logo in svg

Symbol AP-51 Series, Product Reference Manual

Share
Download
Symbol AP-51 Series Product Reference Manual Download Page 85

System Configuration

4-3

System Name

Specify a device name for the 

access point

. Symbol recommends 

selecting a name serving as a reminder of the user base the 

access 

point

 supports (engineering, retail, etc.).

System Location

Enter the location of the 

access point

. The 

System Location

 

parameter

 

acts as a reminder of where the AP can be found. Use 

the System Name field as a specific identifier of device location. 
Use the System Name and System Location fields together to 
optionally define the AP name by the radio coverage it supports and 
specific physical location. For example, “second floor engineering”

Admin Email Address

Specify the AP administrator's email address.

Country 

The 

access point

 prompts the user for the correct country code 

after the first login. A warning message also displays stating that 
an incorrect country setting will lead to an illegal use of the access 
point. Use the pull-down menu to select the country of operation. 
Selecting the correct country is extremely important. Each country 
has its own regulatory restrictions concerning electromagnetic 
emissions (channel range) and the maximum RF signal strength 
transmitted. To ensure compliance with national and local laws, be 
sure to set the 

Country

 field correctly. 

If using the 

access point

 configuration file, CLI or MIB to configure 

the 

access point

’s country code, see 

Country Codes on page A-7

.

access point

 Version

The displayed number is the current version of the 

access point

 

device firmware. Use this information to determine if the AP is 
running the most recent firmware available from Symbol. Use the 

Firmware Update

 screen to keep the AP’s firmware up to date. 

For more information, see 

Updating Device Firmware on page 4-40

.

System Uptime

Displays the current uptime of the 

access point

 defined in the 

System Name field. 

System Uptime

 is the cumulative time since 

the 

access point

 was last rebooted or lost power.

Serial Number

Displays the access point

 Media Access Control (MAC) 

address. 

The access point MAC address is hard coded at the factory and 
cannot be modified. The LAN and WAN port MAC addresses can be 
located within the LAN and WAN Stats screens. For information on 
locating the access point MAC addresses, see 

Viewing WAN 

Statistics on page 7-2

 and 

Viewing LAN Statistics on page 7-6

.

Summary of Contents for AP-51 Series





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands