manualshive.com logo in svg

Symbol AP-51 Series, Product Reference Manual

Share
Download
Symbol AP-51 Series Product Reference Manual Download Page 59

Hardware Installation

2-15

8.

Cable the AP-5131 using either the Symbol power injector solution or an approved line cord 
and power supply.

For Symbol power injector installations:

a. Connect a RJ-45 Ethernet cable between the network data supply (host) and the Power 

Injector 

Data In 

connector.

b. Connect a RJ-45 Ethernet cable between the power injector 

Data & Power Out 

connector and the AP-5131 LAN port. 

c. Ensure the cable length from the Ethernet source (host) to the power injector and 

AP-5131 does not exceed 100 meters (333 ft). The power injector has no On/Off power 
switch. The power injector receives power as soon as AC power is applied. For more 
information on using the power injector, see 

Symbol Power Injector System on page 2-9

.

For standard Symbol 48-Volt Power Adapter (Part No. 50-24000-050) and line cord 
installations:

a. Connect RJ-45 Ethernet cable between the network data supply (host) and the AP-5131 

LAN port.

b. Verify the power adapter is correctly rated according the country of operation.

c. Connect the power supply line cord to the power adapter.

d. Attach the power adapter cable into the power connector on the AP-5131.

CAUTION

Both the Dual and Single Radio model AP-5131s use RSMA type 
antenna connectors. On the Dual Radio AP-5131, a single dot on the 
antenna connector indicates the primary antenna for both Radio 1 (2.4 
GHz) and Radio 2 (5.2 GHz). Two dots designate the secondary 
antenna for both Radio 1 and Radio 2. On Single Radio models, a 
single dot on the antenna connector indicates the primary antenna for 
Radio 1, and two dots designate the secondary antenna for Radio 1.

NOTE

The access point must be mounted with the RJ45 cable connector 
oriented upwards to ensure proper operation.

CAUTION

Do not supply power to the AP-5131 until the cabling of the unit is 
complete.

!

!

Summary of Contents for AP-51 Series





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands