Symantec SV2800, Safety And Regulatory Compliance Manual

Page: 11 / 116

General Safety Information
Symantec SV2800 Series Safety and Regulatory Compliance Guide 11
Intended Application Uses
This product was evaluated as Information Technology Equipment (ITE), which may be installed in computer rooms. The suitability of this
product for other product categories and environments (such as medical, industrial, residential, alarm systems, and test equipment), other
than an ITE application, may require further evaluation.
Site Selection
The system is designed to operate in a typical office environment. Choose a site that is:
• Clean, dry, and free of airborne particles (other than normal room dust).
• Well-ventilated and away from sources of heat including direct sunlight and radiators.
• Away from sources of vibration or physical shock.
• Isolated from strong electromagnetic fields produced by electrical devices.
• In regions that are susceptible to electrical storms, we recommend you plug your system into a surge suppressor.
• Provided with a properly grounded wall outlet.
• Provided with sufficient space to access the power supply cord(s), because they serve as the product’s main power disconnect.
Equipment Handling Practices
Reduce the risk of personal injury or equipment damage:
• Conform to local occupational health and safety requirements when moving and lifting equipment.
• Use mechanical assistance or other suitable assistance when moving and lifting equipment.
• To reduce the weight for easier handling, remove any easily detachable components.
System Access Warnings
CAUTION
The power button, indicated by the stand-by power marking, DOES NOT completely turn off the system AC or DC power,
5V standby power is active whenever the system is plugged in. To remove power from system, you must unplug the AC or
DC power cord from the wall outlet. Your system may use more than one AC or DC power cord. Make sure the AC or DC power cord(s) is/are
unplugged before you open the chassis, or add or remove any non hot-plug components.
• Do not attempt to modify or use an AC or DC power cord if it is not the exact type required by the local electrical code. A separate AC
or DC cord is required for each system power supply.
Indicates hazards related to Electrostatic Discharge.
Indicates the danger of explosion if the indicated information is ignored.
Indicates to unplug all AC or DC power cords to disconnect AC or DC power.