2016 Symantec Corporation This document may be freely reproduced & distributed whole & intact including this copyright
notice.
51
panel of the SV3800.
Figure 3
–14 Rear Panel without Label Fitted for the SV3800
For the SV3800B and SV3800B-20, Figure 3-15 shows the rear panel without the
label fitted. The label is affixed to the solid panel around the screw, and folds over
to adhere to the top panel of the SV3800B and SV3800B-20.
Figure 3
–15 Rear Panel without Label Fitted for the SV3800B
The remaining three labels are applied to the top, left and right sides of the
SV3800 and prevent the top panels from being removed.
Note: If the cooling fans need to be replaced, the top panel will need to be
opened. This will void the labels. A new label kit must be installed after the
top panel is opened. The module must also be factory default reset and
reinstalled in FIPS approved mode.
Figure 3-16 shows the location of the top, side and rear labels on the
SV3800/SV3800B/SV3800B-20.