Symantec Security 5600 Series, Security 5400 Series,Clientless VPN 4400 Series, Administration Manual, Page: 424 / 861

423 Enabling remote access with clientless VPN
Using rule sets to group clientless VPN access rules
4 Click OK .
5 Optionally, do one of the following:
■
To save your configuration and activate later, on the toolbar, click Save .
■
To activate your configuration now, on the toolbar, click Activate .
When prompted to save your changes, click Yes .
6 After creating an advanced rule, you can use it in the following ways:
■
Add the rule to a rule set.
■
Add the rule to a clientless VPN role.
Related information
For further information related to this topic, see the following:
■
“Advanced Rule Properties—General tab” on page 621
■
“About simple rules” on page 415
■
“Using rule sets to group clientless VPN access rules” on page 423
■
“Assigning a rule or rule set to a role” on page 430
■
“Using portal pages to customize the user experience” on page 432
Using rule sets to group clientless VPN access rules
A rule set is a group of clientless VPN access rules. Once grouped, you can assign the entire set of rules
to a role and thereby apply multiple rules to a group of users. You can create empty rule sets and add
rules later or create individual rules and then group them in a rule set.
Creating and populating rule sets
A rule set can contain both allow and deny rules, other rule sets (including itself), contradicting allow/
deny rules (deny always overrides allow), and any number of the same rule.
Prerequisites
Complete the following tasks before beginning this procedure:
■
“Adding simple rules” on page 417
■
“Adding advanced rules” on page 421
To create and populate a rule set
You can create a rule set and then create rules for it, or you can create rules and later add them to the
rule set. You can also remove individual rules or entire rule sets.
To create a rule set
1 In the SGMI, in the left pane, under Policy, click Clientless VPN .
2 In the right pane, on the Rule Sets tab, click New .
3
In the Rule Set Properties dialog box, in the Rule set name text box, type a name for the rule set.
4 Click OK .
Write allowed For allow rules only, do one of the following:
■
To let the user upload files, select Yes.
■
To allow read-only access (for example, download), select No.