Symantec S450 Series, Safety And Compliance Manual, Page: 11 / 170

CHAPTER
03
English Instructions
This chapter includes the following sections:
•
“Safety Instructions” on page 11
•
“S450 Front Panel” on page 16
•
“S450 Rear Panel” on page 18
•
“Installing Components” on page 21
•
“Removing the Rear Cover” on page 25
•
“Installing the Slide Rails” on page 26
Safety Instructions
To ensure normal operation, follow these guidelines:
• Appliance cover removal: Before removing the appliance cover, turn off the power and remove any power cables.
• Ventilation guidelines: Do not block any openings in the system to avoid overheating the appliance.
• Liquid caution: Do not get any liquid on the appliance.
• Symantec appliances are intended for use in a server room or limited access locations only.
!
Important: Any modification to this product, unless expressly approved by Symantec Corporation, could void the
user’s authority to operate the equipment.
This document applies to Server Boards, Server Chassis (pedestal and rack-mount) and installed peripherals. To reduce the risk of bodily injury, electrical
shock, fire, and equipment damage, read this document and observe all warnings and precautions in this guide before installing or maintaining your
server product.
Your server should be integrated and serviced only by technically qualified persons.
You must adhere to the guidelines in this guide and the assembly instructions in your server manuals to ensure and maintain compliance with existing
product certifications and approvals. Use only the described, regulated components specified in this guide. Use of other products / components will void
the regulatory approvals of the product, and may result in product regulations non compliance.
Safety Warnings & Cautions
To avoid personal injury or property damage, before you begin installing the product, read, observe, and adhere to all of the following safety information.
The following safety symbols are used throughout the documentation and marked on the product and/or the product packaging.
CAUTION Indicates the presence of a hazard that may cause minor personal injury or property damage if the CAUTION is ignored.
WARNING Indicates the presence of a hazard that may result in serious personal injury if the WARNING is ignored.
Indicates potential hazard if indicated information is ignored.