Symantec S450 Series, Safety And Compliance Manual, Page: 16 / 170

Chapter 3 English Instructions 16
S450 Front Panel
The S450 front panel includes the following components:
P
OWER
S
TATUS
LED
Indicates the power status of the appliance and exhibits the following behavior:
S
YSTEM
S
TATUS
LED Indicates the system status of the appliance and exhibits the following behavior:
D
ISPLAY AND
N
AVIGATION
B
UTTONS
An interactive OLED display allowing basic configuration of the MGMT
ports and status queries. Buttons for Up, Down, Left and Right Arrows, Enter, and Menu are included and
located just below the display for easy navigation.
USB P
ORT
A 3.0-compliant USB port.
S450 Front Panel
LED Color Description
Off No power is present or the appliance has been powered off.
Solid green The appliance is powered on and fully configured.
Solid amber The appliance is powered on and is in the process of booting.
Blinks from green to amber The appliance is powered on but has not yet been initialized.
Power Status LED
LED Color Description
Off No power is present or the appliance has been powered off.
Solid green Normal.
Solid amber The appliance has not yet been licensed or has encountered a system fault,
indicating overheating, fan or battery failure, or other sensor failure.
Blinks amber The appliance has encountered a critical fault.
System Status LED
I O I O I
USB
Power
Status LED Bezel
System
Status LED
USB
Port Serial
Port
Navigation
Buttons
OLED
Display