Symantec NetBackup 5230 Maintenance Manual Download Page 13

Page: 13 / 69

Table 1-3

NetBackup 5230 Appliance configuration E components (continued)

Component

Number

SAS RAID ports

See

“ Appliance rear panel”

on page 11.

Appliance dimensions and weight

The 2U appliance has the following parameters:

■

3.44 inches (87.38 mm) high

■

16.93 inches (430 mm) wide

■

27.75 inches (704.8 mm) deep

■

52 pounds (23.58 kg)

See

“Symantec Storage Shelf dimensions and weight”

on page 15.

Symantec Storage Shelf description

The NetBackup 52xx appliance can be ordered with 0, 1, 2, 3, or 4 storage shelves.
The appliance provides 4 TB of storage capacity without any storage shelves.

The front and the rear panels of the storage shelf are shown in the following images.

The following table describes the components of the front panel.

Table 1-4

Front panel components

Description

Number

Disk drive module #1 of 16

Disk module release button

Product overview

Appliance dimensions and weight

Summary of Contents for NetBackup 5230






































































Search results

Summary of Contents for NetBackup 5230

Reviews:

Related manuals for NetBackup 5230

Brands by name

Popular brands

Symantec NetBackup 5230, Maintenance Manual

Search results

Summary of Contents for NetBackup 5230

Reviews:

Related manuals for NetBackup 5230

Brands by name

Popular brands