Symantec NetBackup 5230 Maintenance Manual Download Page 34

Page: 34 / 69

Maintenance guidelines

This chapter includes the following topics:

■

Basic maintenance

■

General rack installation guidelines

■

Maintenance requirements and timeframes

■

Maintenance tools

■

Maintenance log

Basic maintenance

The following sections give information about the general maintenance of the
NetBackup appliance and the Symantec Storage Shelf.

Reasons for maintaining the NetBackup appliance and the storage shelf include
the following:

■

Stay aware of general equipment status and current network activity.

■

Increase technical expertise with equipment and software to better address the
issues that may arise or prevent possible issues.

■

Quickly and accurately identify and resolve alarms and problems.

See

“Maintenance requirements and timeframes”

on page 36.

General rack installation guidelines

Make sure that you go through the following rack installation guidelines:

■

Anchor the equipment rack

: The equipment rack must be anchored to an

unmovable support to prevent it from falling over. The rack can fall when one

Chapter

Summary of Contents for NetBackup 5230






































































Search results

Summary of Contents for NetBackup 5230

Reviews:

Related manuals for NetBackup 5230

Brands by name

Popular brands

Symantec NetBackup 5230, Maintenance Manual

Search results

Summary of Contents for NetBackup 5230

Reviews:

Related manuals for NetBackup 5230

Brands by name

Popular brands