laptop. If you use DHCP to connect to the appliance, place the SLF file in an
accessible share on your network. You can then browse to the location where the
SLF file is located when you are prompted to upload the SLF file.
To perform the initial configuration of the Backup Exec appliance
1
Confirm that the Selftest Factory Report shows that components function
properly.
2
Log in to the appliance using the appliance web UI as follows:
■
Accept the default user name of
administrator
.
■
For
Password
, enter
P@ssw0rd
(where “0” is the number zero).
Note:
The password is case-sensitive.
3
Click
Next
.
4
Review the
Appliance configuration overview
page.
All of the items that are marked with an asterisk (*) are required. Symantec
recommends that you notate the information and have it handy because you
cannot complete the initial configuration process without it.
5
Click
Configure
.
6
On the
Network
page, do one of the following:
Do the following in the order listed:
■
Click
DHCP
.
■
In the
Network Interface Card
list box,
select
eth1
, or the port that you used
to connect your network cable.
Note:
Double asterisks (**) represent
the active Ethernet port.
■
Click
Add
.
■
Click
Next
.
■
Continue with step 7.
To use DHCP to configure your network
15
Backup Exec Appliance Quick Start Guide
Configuring the Backup Exec Appliance
