-15-
1. When the camera is aligned with the main body’s connector,push
the camera inwards according to Figure (1).
2. Insert the 3-line plug into the camera connection interface of the
main body according to Figure (2).
Rectification procedures
Problem
Reason
Solution
The aircraft
has no
response
1. The aircraft has entered into
low-voltage protection.
2. When the power of the remote
control is weak, the power light
indicator will blink.
3. The channel selection of the
remote control does not match
with the aircraft’s coding.
1. Charge up the aircraft.
2. Change the batteries of
the remote control.
3. Adjust the channel of
both the remote control
and aircraft such that
they are in synchronized
mode.
The flight
response of
the aircraft is
not sensitive
1. The power of the remote
control is weak.
2. There is an interference with
the same frequency as that of
the remote control.
1. Change the batteries.
2. Change to a place where
there is no interference
with the same frequency.
The aircraft is
flying towards
its side in one
direction during
hovering
1. The aircraft is not calibrated
level to the ground.
1. Re-adjust the calibration
until the aircraft is level
to the ground. For further
details, please refer to
Point III of Page 10 (Level
Calibration Function).
In the headless
state, it is
biased towards
the front
direction
1. Many collisions may cause
head biases.
1. Re-define the front
direction. For further
details, please kindly
refer to Point VII of
Page 11 and 12
(Headless Function).
