-12-
2. Toggling between headless function and normal function:
1. When the aircraft has completed its matching of
frequency, the default of the aircraft is normal mode.
At this time, the light indicator on the aircraft is in
the long blinking mode. When pressing and holding
on to the left upper corner of the headless function
toggle button for 2 seconds, the remote control will
issue a “Di, Di, Di, … …” sound indicating it has
entered into the headless mode. In subsequent long pressing on the same button
for 2 seconds, upon hearing a long “Di” sound, the aircraft has exited from the
headless mode. In the headless mode, the four lights on the aircraft aret slowly
blinking. Every blink is within 4 seconds)
2. Under the headless mode, the operator does not
require to differentiate the head position of the
aircraft, and he just needs to control the aircraft
using the joystick’s direction of the remote control.
3. Rectification for the defining forward direction function:
1. When the aircraft encounters a direct impact with
foreign objects in the headless mode, if there is an
occurrence of deviation of the defined direction, it is
only required to push the accelerator and the
direction joystick to the left bottom corners
simultaneously after rectifying the flying direction of
the aircraft in the correction direction. When the light
indicator of the aircraft is in a long “ON” mode after
slowly blinking for3 seconds, it indicates the
rectification is complete.
Battery changing and charging
methods for aircraft
1. Push the switch button of aircraft to “OFF”,
and press against the battery cover and
slide backward.
Front
Back
Left
Right
Front
Back
Left
Right
