OVERHAUL
Symptom
Reason
Troubleshooting
No response
from the
aircraft
1.Matching freguency is not successfully
made.
2.Insufficient power with the aircraft or
transmitter.
1.Re-Matching: First of all, switch on the
power of the transmitter,then switch on
the power of the aircraft and place it on
the level ground, finally pushing the
throttle lever to the highest and then
pull it back to the starting position.
2.Replace the battery of the transmitter
or charge the aircraft.
The reaction
of aircraft is
not smart or
intermitting
signal.
1.Insufficient power with the transmitter.
2.Antenna of the aircraft is snapped off.
1.Replace the batteries inside the
transmitter.
2.Re-welding the antenna.
The aircraft
can not make
hovering or tilt
flying to one
side.
1.The aircraft is not placed on the level
ground when Matching freguency.
2.The trimmer key on the transmitter is
not reset.
1.Re-Matching freguency.
2.Reset the trimmer key on the transmitter,
details please kindly check Page3
Functional Adjusting of Flying Resetting.
PARTS (OPTIONAL)
Below are the parts available for your kindly selection.In order to facilitate our customers for placing an
order, we specially offer all kinds of parts for your kindly selection.You can buy these parts via our local
agent as well.
X3-01 fuselage
X3-02 window hood
X3-03 blade protecting frame
X3-04 rotating motor assembly
X3-05 reversing-rotating
motor assembly
X3-06 blades
X3-07 circuit board
X3-08 battery
X3-09 USB charging cable
X3-10 transmitter
-8-
