User Manual UWMS-01 Version 2.3
© 2008~2010 SYM. All rights reserved.
Page 17
D.
UWMS-01 Set-up
Picture 9. UWMS-01 Set-up Menu Screenshot
(1)
Site ID & Manager IP:
i.
Site ID (Cascade Code): Type in the unique Site ID (Cascade Code) assigned by Sprint.
“
SYM
”
as a prefix will be automatically added to Site ID you entered. No need for you to
enter the prefix.
ii.
SNMP Manager 1 & 2 IP: These are the target IP addresses to which the UWMS-01’s
data is directed. Use
10.22.25.15
(default value) as the SNMP Manager 1 IP unless you
are told otherwise. SNMP Manager 2 IP is optional. Click the orange Apply button to
effectuate the change.
(2)
Heartbeat Control:
i.
Latitude and Longitude: Type in the GPS information of the site where the UWMS-01 is
installed. Without the location information, heartbeats will not be generated. The
latitude format is (‘N/S’) (+/-) ddd.dddddd, e.g., N +39.006957. The longitude format is
(‘E/W’) (+/-) ddd.dddddd, e.g., W -94.532306. To effectuate the change, click Apply.
ii.
Heartbeat Interval: Set the heartbeat interval from 1 to 60 minutes using the drop-down
box. The default interval is 20 minutes. To effectuate the change, click Apply.
iii.
Heartbeat On/Off: You can turn off the heartbeat. However, it is advised that you
always turn on the heartbeat when the UWMS-01 is in operation. To effectuate the
change, click Apply.
1
2
3
4
5
6
7
8
9
10
