16
8. USE OF EACH COMPONENT
SEAT LOCK
y
Unlock:(JET 50)
Insert your ignition switch key into the lock on
the center rear of the seat, and turn the key to
the right. Then, the seat can be lifted up.
y
Unlock:( MASK 50. RS-21 50)
Insert your ignition switch key into the lock on
the lower left of the seat, and turn the key to
the right. Then, the seat can be lifted up.
y
Unlock:(DD 50)
Engine stopping condition:
Insert your key into the ignition switch push the key, and turn it to the right. Then, the seat can be
lifted up.
Engine running condition:
Just turn it to the right then the seat can be lifted up.
y
Lock:
Press the seat down and push it locks automatically.
SAFETY HELMET HOOK
y
Open the seat, and hook the safety helmet chin belt onto the hook, and then lock the seat.
LUGGAGE BOX
y
This box is located under the saddle.
y
Maximum load capacity: 10kg.
y
Do not store valuables in the box.
y
Please make sure that seat cushion had been
locked completely after it was down.
y
Take out valuables before washing to avoid
wetting these objects.
y
Do not place thermal sensitive objects in the
box because of engine’s heat and high
temperature.
CAUTION:
y
Do not put the scooter key in the luggage com
after seat has been unlocked. This will prev
key from being locked inside the luggage com
if the seat should be unintentionally closed.
y
Be sure to remove the key after the seat
has been locked.
CAUTION:
y
Do not hang your safety helmet on the helmet hook while riding. Doing so could interfere with
your riding safety and could damage the scooter.
Seat lock
Helmet hook
Luggage box
