background image

11

6. RIDING

Keep the related parts of your body such as arms, palms, lumbar, and toes relax and ride with the most
comfortable posture in order to be able to react quickly whenever it is necessary.

y

  Rider’s posture will greatly affect riding safety.    Always keep your body’s gravity in the center of

the seat, if your body’s gravity is on the rear part of saddle, the front wheel load will be reduced,
and this will cause the steering handle shaking.    It is dangerous to ride a scooter with an unstable
handle.

y

  It will be much easier to make a turn if rider inclines his body inward when turning.  On the other

hand, the rider will feel unstable if his body and the scooter do not incline.

y

  The scooter is hard to control on a bumpy, unleveled, unpaved road, try to know the road

conditions in advance, slow down and use your shoulder’s force to control the handle.

y

  Suggestion: Do not load objects on the front pedals unnecessarily, to avoid affecting the riding

safety and the operation of steering handle.

7.  USE GENUINE SPARE PARTS

In order to maintain the scooter’s best performance, each part’s quality, material, and machined
precision must conform with the design requirements.   

“SYM Genuine Spare Parts”

 were made from

the same high quality materials used for the original scooter.    No parts would be sold to the market until
they could meet the designed specifications through sophisticated engineering and stringent quality
control.    Therefore, it is necessary to purchase 

“SYM Genuine Spare Parts”

 from 

“SYM Authorized

Dealers or

 

Franchised Dealers”

 when replacing spare parts.    If you buy cheap, or fake substitute

parts from the market, no guarantee can be provided either for the quality or durability.    Also, it may
result in unexpected troubles and lower the motorcycle’s performance.

y

 Always 

use 

SYM Genuine Spare Parts

 to keep your scooter pure blood and to ensure its long

service life.

 WARNING:

y

 Be aware of the weight load on the scooter.    The scooter will handle different depending on its

load.    Over loading the scooter will cause the scooter to become unstable and hard to
maneuver, which could result in an accident that could cause injury or death.

 CAUTION:

y

 Only carry cargo or luggage in/on places that are specifically designed for carrying cargo or

luggage.

y

 Do not place flammable objects, such as rags, paper, plastic, etc. or other objects between

body covers and the engine.    Placing objects in these areas could cause a fire or other
damage to the scooter.

Suggestion:

To maximize the scooter performance and prolong its life:

y

 The first month or first 1000km is the wear- in period for the engine and components. Avoid rapid

acceleration, and keep the speed below 60km/hr.

Summary of Contents for Jet Euro X 50
































Reviews: