7. Use of Each Component
8
ENGING CONTROL SWITCH
This switch is located in the luggage box, under
the seat.
To set on the ENG. control switch, switch it
to
〝
ON
〞
or
〝 〞
.
Switch to
〝
OFF
〞或〝 〞，
before start the
engine.
Be sure the seat locked preperly after set on
the switch.
USE OF BUTTONS
Light switch
：
This is for high beam.
This is for low beam. (Please turn to low beam when riding in city)
When the switch is turned to this position, all lights will go off.
Electrical starter button
：
This is a starting motor button (switch) for engine starting.
With the main switch "
" position, press this button while holding the front or rear brake lever
will start the engine.
CAUTION:
Release this button immediately after engine has been started, and never press the button again to
avoid damaging the engine.
This mechanism is a safety design. The engine can only be started after the front or rear brake
lever (pedal) has been applied.
Do not use light system. Turn headlight and turn signal lights to the “
” position when the engine
is being started.
Seat open switch
Horn switch
Electrical
starter button
Light switch
Turn signal switch
